JRC JMR-5400 Series Instruction Manual page 72

4.5.2 Setting consort ship preset
As described in "4.5.1 Highlighting TT/AIS Symbols by specifying search criteria", a consort ship can be
specified at the highlighting display of TT symbols.
Memo
• The consort ship preset contents that are set in the display unit on the master side of ISW
(LAN) of simple ISW (LAN) are shared among the display units on the slave side among the
display units that participate in the network
• Separate from the consort ship preset setting that is shared, consort preset for 20 ships can
be set independently in the display units on the slave side. In this case, the consort ship preset
contents that are set on the slave side are not shared with the display unit on the master side.
• The consort ship preset setting that is set on the AIS tab is not shared.
[Operation procedure]
Open the consort ship preset setup screen by performing the following menu operations.
[Menu] button → 10. Settings → 12. Consort ship preset
01. [TT] tab
No. Setting items
- No.
- Target
number
03 Delete
02. [AIS] tab
No. Setting items
- No.
- MMSI
03 Delete
Section 4 Target Tracking
Displays the consort ship number. The number is between 1 and 20.
Specify the Target ID of the TT that is specified for the consort ship.
When the TT option is available, a number between 1 and 100 can be
specified and when the TT option is not available, a number between 1 and
30 can be specified.
Deletes the Target ID of the selected consort ship number.
The Target ID to be deleted can be selected on the checkbox next to the
number.
Displays the consort ship number. The consort ship number is between 1 and
20.
Specify the MMSI that is specified for the consort ship.
Deletes the MMSI of the selected consort ship number.
The MMSI to be deleted can be selected on the checkbox next to the number.
Setting contents
Setting contents
4-20