Adjustment Main Clamping - probst HVZ-ECO Operating Instructions Manual

Adjustments
6.5

Adjustment main clamping

Machine Side
Adjust adjusting „C" at the main gripping corresponding
to the length of the stone layer  see sticker at the
device (machine side).
Pull the spring bolt () upwards, rotate around 180° and
lock in position (in nick)
Adjustment sticker
51400034
Machien side
Fig. 14
Pull main gripping in the corresponding position ().
Rotate the spring bolt again around 180° and lock in
position.
V3
23 / 41
Machine side
Fig. 15
GB