gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
12.5. gaitway-3D startup
Date:
Time:
Seq.
Description
No.
75.
Switch on the operator computer and login
with administrator rights.
76.
Install the gaitway-3D software on the
operator computer.
Report computer characteristics.
77.
Connect an Ethernet cable between the PC
and one router LAN port.
Configure the router as a DHCP server and
set the TCP/IPv4 parameters on the PC to
obtain an IP address automatically.
Iss.: A
Rev.: 9
Date: 07/12/2020
Test Step
Required/No
minal (incl.
tolerance)
Page : 54
Name:
Measurements/Test Results
Measured/
Remarks/Calculations
Calculated
Computer characteristics:
Processor:
RAM:
Windows version:
Hard disk capacity:
Hard disk free space:
Router configuration example:
Router IP address = 192.168.0.1
Router subnet mask = 255.255.255.0
DHCP server: enabled
DHCP IP Address range: 100 to 200
PC (TCP/IPv4) configuration example:
obtain an IP address automatically
or using a fix IP address
•
IP address = 192.168.0.99
•
Subnet mask = 255.255.255.0
•
Default gateway = 192.168.0.1
Pass/
No
pass