Gaitway-3D Final Assembly - h/p/cosmos Arsalis Gaitway 3D Service Manual

gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS

12.4. gaitway-3D final assembly

Date:
Time:
Seq. Description
No.
27. Mount the handrail supports to the foot
plates with screws and washers.
28. Screw the handrails to the handrail supports.
29. Screw the handrail longitudinal bars to the
handrail posts for 150/50 treadmill.
30. Screw the handrail transversal bar to the
handrails for 170/65 treadmill.
31. Screw the safety arches to the handrail
supports and to the handrails.
32. Connect the safety arch emergency stop to
the treadmill.
33. Open the treadmill motor-cover.
34. Cut the 3 grommets of the cable holes in the
treadmill front panel.
Iss.: A Rev.: 9 Date: 07/12/2020
Test Step
Required/No
minal (incl.
tolerance)
Torque =
30Nm
Torque =
15Nm
Torque =
15Nm
Torque =
1.8Nm
Torque =
15Nm
Page : 27
Name:
Measurements/Test Results
Measured/ Remarks/Calculations
Calculated
 4x DIN6798A-M10
 4x DIN933-M10x30
Ensure that the handrail support ribs do
not touch the treadmill beams and that the
handrail supports do not touch the
treadmill motor-cover.
Screws in plastic screws box
Screws in plastic screws box
Screws in plastic screws box
Screws in plastic screws box
Pass/
No
pass