Installation Of Side Panels (Optional) - EOS Edge Control Assembly And Operating Instructions Manual

Sauna heating appliance

Table of Contents

Available languages

Installation of side panels

Side panels are optional accessories and can be mounted if required on 1 - 4 sides. The side panels

are not only a decoration element they will also significantly reduce the radiant heat. This allows

the reduction of the side safety gap to 5 cm (Fig. 8).

• First insert the bottom end

tongues of the panel into the

openings in the heater shell,

then put the upper part over

the top edge of the outer

shell (Fig .7).

• Secure each side panel with 2

supplied screws (Fig. 7).

• The safety gaps between the heater and the cabin wall, as well as the protective heater guard

rail, the bench and other flammable materials change to 5 cm (see Fig. 8)

(optionally available)

Guard rail

5 cm

Side panels

Fig. 8

Fig. 7

Table of Contents

Chapters

Table of Contents

Do you have a question about the Edge Control and is the answer not in the manual?

Edge