Table of Contents
Advertisement
Orion
Revision 2.8
27 August 2014
Installation and First Time Power Up
Unloading
WARNING
Figure 1 - 1
Tower Pivot Point
Figure 1 - 2
Tower to Base Bolts
(1 of 4 shown)
Machine can be easily unloaded and transported by a forklift with a minimum capacity of
2500 lbs.
Use caution when uprighting the tower. Injury could occur.
1. If your model is a high tower, it may have the tower pivoted downward.
2. Use a secured strap to pivot the tower upright, securely hold the tower upright. Bolt
the tower to the base using the four provided 10mm bolts. Make sure not to pinch any
electrical connectors.
Semi-Automatic Stretch Wrapping Machine
Introduction and Safety
Sentry by Orion
Page 1-9
Advertisement
Table of Contents
