Configuring The Camera - FLIR BLACKFLY S GIGE Getting Started Manual

CONFIGURING THE CAMERA

Make sure the camera is connected to your
computer and that the LED in the back of the
camera is blinking green.
/ / Start Swing Catalyst and click Settings, and
Cameras.
/ / Select your camera from the list, and click
Advanced.
The Advanced Camera Settings window exposes
many settings which you might find handy.
Note that most of the settings are set to auto.
We can change these settings to get better
control over the image quality for video analysis.
We will take a look at each setting in the next
pages.
7