diagnostic-information
multiple feature modules of the device. This command displays the output of the
display
commands.
•
Save the operational statistics for each feature module of the device:
<H3C> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.tar.gz)[flash:/diag_H3C_20220713-024922.tar.gz]:
Diagnostic information is outputting to flash:/diag_H3C_20220713-024922.tar.gz.
Please wait...
Save successfully.
To view the contents of the
command in user view, and then press the
•
Display the operational statistics for each feature module of the device. (Details not shown.)
<H3C> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
===============================================
===============display clock===============
01:40:29 UTC Sat 03/11/2023
=================================================
===============display version===============
H3C Comware Software, Version 7.1.064, Alpha 5611P66
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.
H3C WSG1840X uptime is 0 weeks, 0 days, 0 hours, 12 minutes
Last reboot reason : Power on
Boot image: flash:/boot.bin
Boot image version: 7.1.064, Alpha 5611P66
Compiled Jun 13 2022 15:00:00
System image: flash:/system.bin
System image version: 7.1.064, Alpha 5611P66
Compiled Jun 13 2022 15:00:00
with 1 ARM 2000MHz Processor
2048M bytes DDR4
3776M bytes EMMC Memory
Hardware Version is Ver.A
...
Displaying information about the device
Use the
display device
<H3C> display device
Slot No.
1
command in any view to display or save the operational statistics of
,
version
display
default.diag
command to display information about the device.
Subslot No. Board Type
0
H3C WSG1840X
,
and
device
display
file, execute the
and
Page Up
Status
Max Ports
Normal
2
display clock
current-configuration
more default.diag
keys.
Page Down
8
,