(Optional) Installing A Surge Protected Power Strip; Connecting The Device To The Network - H3C WX1800H Series Installation Manual

Figure 13 Installing a lightning protector for a network port

(Optional) Installing a surge protected power strip

IMPORTANT:
Before installing a surge protected power strip, read the instructions in the document that comes
with the strip.
If you use an AC power line routed from outdoors for the device, use a surge protected power strip
for the device to protect against damages caused by lightning strikes. No surge protected power strip
is provided with the device. Purchase one yourself if required.
To use a surge protected power strip, first connect the AC power line routed from outdoors to the strip
and then connect the power cord from the device to the strip.
You can attach the surge protected power strip to the rack, workbench, or wall of the equipment
room.

Connecting the device to the network

Connect a WAN port on the device to the uplink network.
1.
Connect the LAN ports to APs directly or through a switch. In
2.
connected to APs directly.
12
Figure 14, the LAN ports are