User's Guide
1. Right-click on the Epson Print Admin icon in Devices and Printers from the Control Panel.
2. Select Printer Properties.
3. Make sure that Epson_Print_Admin is selected in the port list of the Ports tab.
4. Click Configure Port.
5. Check Server URL and User ID.
Note:
You can change the Server URL if the administrator has granted permission to do so.
No Authentication Sound Is Emitted Even When the Card Is Held
Over the Authentication Device
If the printer does not show the panel display in sleep mode (energy saving mode), the authentication sound may
not be emitted.
Unauthenticated Printing is no Longer Possible
The destination printer for unauthenticated printing is associated with the printer driver by IP address.
If the IP address for the target printer is changed, the printer cannot be found and unauthenticated printing is not
possible.
Download and install a printer driver to print without new IP address authentication, or follow the steps below to
change the IP address for the printer port.
1. Select Start menu > Device > Printers and Scanners in Windows.
The URL for the user page logon screen is included in the registration completion email. In addition, a link to
the user page is displayed in the Epson Print Admin Notification Tool.
2. Click target printer, and then click Manage.
3. Click Printer Properties.
4. Click Configure Port on the Ports tab.
The configuration screen for the Epson Print Admin port is displayed.
5. Enter the new IP address in IP Address.
6. Click OK to close the screen.
Solving Problems
44