Quick Search; Repeat Function; Random Playback; Track Sampling - TechniSat DIGITRADIO 360 CD Instruction Manual

8.5 Quick search

While the track is playing, you can perform a quick search forwards or backwards to find a specific section. There
is no playback during the search process.
> Press and hold the FORWARD or BACK buttons on the device or the TUNING s/97 or TUNING r/8:
(45, 25) buttons on the remote control in order to perform a quick fast forward and rewind within the
track for as long as the buttons are held down.

8.6 Repeat function

You can select whether a track, the entire folder/album (only for MP3 CDs) or all of the tracks on the CD are to be
repeated.
> To do so, press the REPEAT (48) button on your remote control repeatedly. The selected mode is shown
on the display (Repeat track, Repeat album, Repeat all).
> To switch the function off again, press the REPEAT button as often as required until the repeat display is
no longer shown.

8.7 Random playback

With the random generator, the CD tracks can be played back in a randomly mixed order.
> During playback, press the RANDOM (22) button on the remote control; Random appears on the display.
> To switch the function off, press the RANDOM button again.

8.8 Track sampling

This function enables the first 10 seconds of the tracks to be sampled.
> Press the INTRO (21) track on your remote control to start/end the function. The selected mode is shown
on the display.
42 42