Floor Load; Dimensions - BÖWE P12 Installation Instructions Manual

5 Installation

5.3 Floor Load

The place of installation must be designed to comply with the specified floor load. This consists of:
Static load = machine weight + max. solvent filling
Dynamic load = cage centrifugal force with normally distributed, spin-damp garments
Do not forget to take into account the centrifugal forces that arise during the spin processes, according to
the local conditions (ground, supporting walls, etc.). No resonance is permitted.
Please consult building specialists.
5.3.1

Dimensions

Depth*
Width*
Portion of the floor surface for
force transmission
Weight without solvent
Weight with solvent (stat. load) kg
Cage centrifugal force (dyn.
load)
Floor load (stat. + dyn. load)
* Portion of the machine dimensions that is decisive for the size of the cage centrifugal force and floor
load.
** Calculated with:
- 12 kg-15 kg-18 kg (26.5/33.1 /39.7 lb) loaded weight, with 50% of this unevenly distributed
- Mixed outer clothing
- EBS
- 500 rpm
Building specialists will find the best solution, from both a structural and economic point of view, for the
design of the foundation. They take into consideration the system or machine-related conditions and the
local particulars.
Use a load dispatcher frame if the permissible load for your floor is not sufficient.
28
Slimline
P12 P15
mm 1200 1310
inches 47.2 51.6
mm 1080 1080
inches 42.5 42.5
2
m 1.3 1.41
2
ft 14.0 15.2
kg 1140 1240
lb 2513 2734
1590 1770
lb 3505 3902
N 5900 ** 7300 **
lbs 1326 ** 1640 **
2
N/m 16500 ** 17500 **
2
lbs/ft 344 ** 365 **
5
Crossline
P18 P12 P15
1420 1200 1310
55.9 47.2 51.6
1080 1080 1080
42.5 42.5 42.5
1.53 1.3 1.41
16.4 14.0 15.2
1340 1240 1340
2954 2734 2954
1950 1690 1870
4299 3726 4123
8800 ** 5900 ** 7300 **
1977 ** 1326 ** 1640 **
18300 ** 17300 ** 18200 **
382 ** 361 ** 380 **
P18
1420
55.9
1080
42.5
1.53
16.4
1440
3175
2050
4520
8800 **
1977 **
18900 **
394 **
P12-P15-P18