Advertisement
Turbine, ECU and receiver installation
Use an actual engine to align the entry
cone properly.
Then mount the turbine in centred and
straight, aligned with to the trust pipe.
To be safe, ask your turbine manufacture
for the correct distance between rear edge
of the engine's exit nozzle and the front
edge of the stainless steel thrust tube!
At the engine sizes commonly used for this
aircraft, 20-25 mm is a good starting point.
?
With this information you will be able to
place your engines correctly.
Please also note that some engine mounts
are not symmetrical, so it might be
necessary to use plywood spacers between
mounting rails and aluminium engine
mount to center the engine properly.
24
Advertisement
