Carrier X-POWER Series Service Manual page 98

R410a DC Inverter 60Hz
director onto the exhaust hood of the outdoor unit to facilitate heat dissipation. See the figure below. The
height of the air director is HD (namely H-h). Please make the air director on site.
>1m
Front
5) For limited space installation
The dimensions should meet the request according to the marks, otherwise, a mechanic exhaust device
must be added.
A
B
Front view
A
B
Front view
A
>45°
C
>1000mm
Note: 300mm=11-13/16in., 1000mm=39-3/8in.
6) Set the snow-proof facility
In snowy areas, facilities should be installed to prevent snow. (See the figure below) (defective facilities
may cause malfunction.) Please lift the bracket higher and install snow shed at the air inlet and air outlet.
Snow shed for air inlet
Snow shed for air inlet
116
Front
100-500mm
D
C
Side view
A
B
Front view
B
>300mm
D
Airflow deflector
Snow shed for air outlet
Carrier service manual
Installation