Advertisement
ML20900 ECL Series Mortise Lock
Step 4
Inside Face of Door
Fig. 4a
Step 5
Adjustment bolt needs
to be threaded in farther.
Step 6
Notes:
•
Unthread Adjustment Bolt approximately four turns
for a good starting point (After being fully tightened)
•
Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
5) Installation Instructions (Continued)
Align adjustment bolt with threaded hole in lever
Align adjustment bolt
with threaded hole in
lever
Adjustment bolt needs
to be unthreaded.
Use Correct Spindle Orientation
STANDARD
Good
Lever
Adjustment bolt fully aligned.
10
ASSA ABLOY
MUSÉO
Bad
Fig. 4b
L e v e r
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
- Quick Links:
- Installation Instructions
Hide quick links:
Advertisement
