Operator's manual
DUO 680 Double-rotor Rake
Owing to in-line design of the machine it is forbidden to take sharp turns with lifted rotors. Too
sharp a turn may cause fall or damage to the machine. The risk is reasoned by Fig. 28.
F
F
M
Fig. 28. Risk of falling due to momentum M when taking a tight turn with lifted rotors
NOTE:
There is risk of machine falling when taking a tight turn with lifted rotors.
NOTE:
In order to avoid potential machine falling reduce machine lifting height on
tight turns or increase turning radius.
NOTE:
There is risk of machine falling when operating on a slope (Fig. 29).
- 24 -