SaMASZ DUO 680 Operator's Manual page 23

Double-rotor rakes

Hide thumbs Also See for DUO 680:

Table of Contents

Single windrow option

lower rear swath guard by pulling down as provided on Fig. 8,

if need be, set distance between the rear guard and rear rotor depending on forage quantity,

Fig. 22. Position of rear rotor in operating position with single windrow option

dismount double-action cylinder of rear rotor, so that rotor is turned leftwards,

drive the tractor until rear rotor is maximally left turned,

if need be, adjust the rear rotor position in order to obtain optimum overlapping of rear and front

rotor (Z) depending on type of raked material. Overlapping (Z) should be set in such way that

there is no material left on the ground in between the rotors,

Double windrow option

lower rear swath guard by pulling down as provided on Fig. 8,

Fig. 23. Position of rear rotor in operating position with double windrow option

take rear rotor guard out from transport holder and mount in operating holder retracting it for

proper distance,

lock it with front rotor cotter,

retract cylinder of the rear rotor maximally, so that rotor is turned rightwards,

drive the tractor until rear rotor is maximally right turned,

Set rear 3-point linkage links on such height H so that front ground following wheel is on the

ground while on front tiller cylinder there is clearance which enables ground following function

for front rotor,

Operator's manual

- 21 -

DUO 680 Double-rotor Rake

Table of Contents