SMC Networks ISE35 Operation Manual page 25

●How to change the secret code
At the time of shipment, the secret code is set to [000], but can be changed to optional one.
<How to perform>
1. After the lock setting is finished (page 23), perform all three steps in the unlock setting procedure.
(page 23, "3")
2. After the secret code is inputted and the indication changes to [
buttons simultaneously for 5 seconds or more. [000] is indicated and the change of secret code is
asked.
For how to input the secret code, refer to "How to input and change the secret code".
Changed secret code is indicated.
3. After check it is as desired, press the
The measurement mode returns. At this time, if the
is not entered and the change of secret code is asked.
●How to input and change the secret code
The first digit starts flashing.
Press the or
Pressing the
(If the button is pressed at the uppermost digit,
the first digit starts flashing again.)
After the setting is finished, keep pressing the
second
for 1 or longer.
If the operation is not performed for 30
change of the secret code, the measurement mode returns.
button.
button to set the value.
button starts flashing the second digit.
seconds
-24-
], keep pressing the
or button is pressed, changed secret code
button
during input and
and
No.PS※※-OMJ0004-E