Table of Contents
Advertisement
3. Response time (
)
The response time of the switch output can be set optionally.
If the response time is changed, the indication updating interval correspondingly changes.
If the changed response time causes the chattering in the switch output or indication, set the response
time longer.
<How to perform>
1. Keep pressing the
After [
] is indicated, press the
Then, [
] and current setting appears in turn.
2. Press the
or
3. Keep pressing the
Then, the setting is finished, and the measurement mode returns.
4. Operation mode (
The switch operation mode can be selected.
For the operation in hysteresis mode and window comparator mode,
refer to "List of output mode" on page 19.
<How to perform>
1. Keep pressing the
After [
] is indicated, press the
Then, [
] and current setting appears in turn.
2. Press the
or
3. Keep pressing the
Then, the setting is finished, and the measurement mode returns.
button for 2 seconds or longer in the measurement mode.
button twice.
button to select the response time.
button for 2 seconds or longer after selection is completed.
)
button for 2 seconds or longer in the measurement mode.
button three times.
button to select the operation mode.
button for 2 seconds or longer after selection is completed.
-15-
No.PS※※-OMJ0004-E
Hide quick links:
Advertisement
Table of Contents
