Section 7: Features & Benefits - Land Pride RBT55120 Operator's Manual

Section 7: Features & Benefits
Section 7: Features & Benefits
Features
Warranty
120" Working width
90-180 hp range
Cat. 2 and 3
Quick hitch compatible
Blade angles left or right
o
up to 45 in either direction
Blade offsets left or right up to 33"
Blade tilts up or down up to 15
Fully welded
reinforced main frame
Heavy-duty pivot assembly
with 4" solid steel kingpin
Formed 19" moldboard with top lip
reinforcement
5/16" Moldboard
with 1/4" reinforcement
Heavy-duty pivot assembly
Grease points in
front pivot shaft
Reversible cutting edge
Retractable park stand
Skid shoes (optional)
End plates (optional)
Hardened wear edges (optional)
Single or dual gauge wheels
(optional)
26
RBT55120 Rear Blade 301-172M
Table of Contents
RBT55120 Model
One year parts and labor. See warranty page for complete details.
Can handle large capacities.
Fits a wide variety of tractors.
Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to be
used.
Compatible with Land Pride Quick hitch for easy attachment and removal. Increases
productivity.
(15 positions manually: Center, 7 clockwise, and 7 counterclockwise)
(Hydraulically: Any degree up to 45 degrees)
Allows operator to set the blade at the angle of his choice up to 45
desired amount of material with satisfactory results.
(15 positions manually: Center, 7 positions left, and 7 positions right)
(Hydraulically: Any position up to 33")
Allows the operator to position the end of the moldboard beyond tractor tire and close
to solid obstacles such as fences, buildings, and abutments.
o
Allows the operator to do simple tasks such as putting a crown in the middle of a road
to making V-type ditches of various sizes.
Overall mainframe strength is enhanced due to being fully welded.
1" Plate steel turntable and 4" kingpin for handling the high amount of torque that can
be transferred to this area.
Formed moldboard with 90 degree bent top for additional strength. Tall moldboard
allows for a great deal of material to be moved.
Heavy-duty moldboard to handle loads from 180 hp tractors.
1" Plate steel turntable and 4" kingpin handle tremendous torque delivered by up to
180 hp tractors.
Helps front pivot shaft to easily move.
Lengthens blade life by being able to turn cutting edge over and use other edge.
Enables one person hook-up and keeps the mainframe off of the ground.
Skid shoes protect moldboard from hitting low lying obstructions such as manhole
covers.
End plates allow the blade to hold material in to drag from one spot to another.
Attach to outer edges of moldboard to prevent to wear in moldboard during ditching.
Gauge wheels position the height of the blade to aid in grading.
Benefits
o
to move the
11/27/18