Table of Contents
Advertisement
Section 7: Features & Benefits
Section 7: Features & Benefits
Features
Surpassed rugged
industry standards
Factory assembled
5 Year gearbox warranty
160 HP Divider gearbox
and 110 HP wing gearboxes
Gearbox seal protection
Smooth Top Design
Low tongue weight
Narrow tongue construction
Input driveline:
Cat. 6 CV or Cat. 5 Conventional
Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches
Slip-clutch drivelines
High Blade tip speed
15,000 FPM Wing RC3615
15,268 FPM Center RC3615
14,620 FPM Wing RCM3615
15,578 FPM Center RCM3615
6" Blade overlap
Left wing rotates clockwise
3/16" Round stump jumper
1/4" Sidewall thickness
Self-leveling hitch
Hinged wing sections
1" Solid hinge rods
Wing transport locks
Enclosed front to rear dual
leveling rods
5-Bolt hubs
Spring cushioned center-axle
Replaceable wheel spindles
Wheel options
Double swivel hitch option
Bar-tite hitch option
48
RC3615 (540 RPM) and RCM3615 (1000 RPM) Rotary Cutters 330-502M
Table of Contents
RC3615 and RCM3615 Models
Rotary Cutters
All Land Pride
voluntary testing procedures.
Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
Shows confidence in gearbox integrity.
A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox bottom seal protection for longer bearing life.
Allows for easy cleaning of deck.
Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Allows for a tighter turning radius.
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
Allows clean cutting of material.
Eliminates skipping during turns.
Better discharge of material. Picks up tractor tracks.
Standard thick stump jumper material keeps damage to a minimum.
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Reduces drawbar wear by keeping hitch level while going through ditches.
cutter
Allows
to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
Larger diameter hinge rod gives greater strength to the
the hinge area itself.
Wing transport locks securely hold the wings in the folded position in case of hydraulic
failure.
Dual leveling rods enable the
rough terrain.
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Protects unit from bumps and ground shock.
Wheel spindles can be replaced when damaged without replacing entire axle
assembly.
Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can't go
flat.
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Benefits
have been designed and tested and meet rigorous
cutter
cutter
to pull equally on the rear axle during travel over
from front to rear, and in
4/20/15
Advertisement
Table of Contents
