Section 10: Features & Benefits - Land Pride NTS2607 Operator's Manual

Section 10: Features & Benefits
Section 10: Features & Benefits
Features
Cat. I & II 3-point hitch option,
QH adaptable
Pull-hitch option
7 ft., 9 ft., & 11 ft. widths
Machine weight
Lift hooks
Large seedbox capacity
Water-tight seedbox
Easy seedbox clean-out
Heavy duty seedbox lids
with stay open support
Seed splash guards
Wind guarded seed drops
Grass seed cups
Grass seed agitator
Native seed agitator
Powdered metal in fluted
sprockets
Seed rate charts on underside
of seedbox lids
Easy seed rate adjustment on
grass and native seedbox
#40 Roller chain drive
Three speed transmission for
the grass seedbox
Grass seeds low reduction
drive range
Four-Speed transmission for
Native seedbox
Spring loaded lock in/out pins
on the small seeds and native
seeds drive sprockets
All seeds drive sprocket
with Patented lockout clutch
Crab action spiked front
rollers
Mounted rear packer roller
Ground driven metering
Mud scrapers
LED Signal lights
Acremeter option
70
NTS2607 , NTS2609, & NTS2611 No-Till Seeder 329-141M
Table of Contents
,
NTS2607 NTS2609
Fits a wide variety of tractors. Also fits Land Pride Quick Hitch for easy one person hook-up
to tractor. Cat. I works with NTS2607 without Native Seedbox only.
Allows for easier hook-up to tractor and is adaptable to smaller tractors. Rear tires help
support seeder weight.
Provides high productivity over wide areas on flat or gently sloping terrain.
Heavier unit weight provides for better spike penetration and seed-to-soil contact.
Lift hooks on end of grass seedbox can be used with spreader bar for easy loading and
unloading of the machine.
Keeps filling to a minimum and increases productivity.
Keeps moisture and rodents out of the seedbox.
Simply moving the flute lever to the proper position allows for easy clean-out and removal
of all of the seeds in the seedbox.
Precision fit to keep water and rodents out and HD construction with integral prop support
keeps lid from slamming shut in windy conditions.
Prevents seed from being spilled out between the lid and seedbox during hopper filling.
Protects seed from blowing away and ensures uniform seed distribution across the full
width of the seeder.
Proven fluted seed cups for highly accurate seed delivery.
Prevents bridging and keeps seed flowing evenly to grass seed cups.
Aggressive paddle style agitator to keep fluffy native grass from bridging.
Helps dissipate any heat buildup from fluted area and plastic seed cup housing.
Conveniently positioned as large durable decal under the seedbox lids for handy
calibration reference.
Proper seed rate adjustment lever positioning is conveniently indicated on the seed rates
chart for ease of setting and adjustment with a high level of confidence.
Provides for smooth and quiet running with a high degree of reliability. Adjustable idlers
and slotted take-ups help keep the drive chains allow for chain take-up.
A simple and easy repositioning of the drive gear allows for three drive speeds (high, low,
and low reduction) and one neutral position for locking out the grass seeds drive.
Uses less seed. Good for seeding food plots to draw in wild life animals.
Easy and fast speed change, saves time from removing chains.
Spring loaded lock in/out pins make it easy to lock out the small seedbox and/or native
seedbox when not in use. Just pull out on lock in/out pin and turn it a quarter of a turn to
disengage individual seedbox drive. Turn lock in/out pin another quarter of a turn to
engage individual seedbox drive.
Lockout clutch protects all seed cups from damage caused by turning backwards and while
backing up with rear roller on the ground. Its spring loaded lock in/out pin makes it easy for
the operator to engage and disengage power to all seedbox drive sprockets without
engaging / disengaging individual seedbox drive sprockets.
Two 8" diameter front rollers can easily be angled from 0-18 degrees providing for more or
less aggressive dethatching action or soil cultivation and seedbed preparation.
Full length rear rollers come with cast steel and notched packer type rollers for maximum
down pressure and seed to soil contact.
The rear roller serves as the primary seed meter drive providing a very high degree of
accuracy, low maintenance costs, and long component life.
Reduces build-up of mud and debris on rollers when working in wet, sticky, or trashy soil.
LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Allows operator to see how many acres or hectares have been seeded.
, &
NTS2611
Benefits
9/10/20