Table of Contents
Advertisement
Section 7: Features & Benefits
Section 7: Features & Benefits
Features
Surpassed rugged industry standards
Factory assembled
7 Year gearbox warranty
Rugged heavy built gearboxes
Gearbox seal protection
Sliding guard for splitter gearbox
2 Piece driveline shields
Low hitch weight on tractor tongue
Narrow A-frame hitch
Adjustable park jack angle
Adjustable driveline hanger
Input driveline: Cat. 6 CV
Drivelines with slip-clutches:
Cat. 4 intermediate
Cat. 4 or Cat. 5 wings
Grease zerks on end caps of driveline Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed
6" Blade overlap
Diamond blade bar
3/16" Round stump jumper
Smooth top design
Tops of decks are 100% welded
1/4" Sidewall thickness
Multiple center skid shoe locations
Beveled skid shoes on wings
LED signal lights
Hinged wing sections
1" Solid hinge rods
Wing transport lock pins
Enclosed dual 1" leveling rods
5-Bolt hubs
Drain holes in wheel rims
Spring cushioned center-axle
Optional spring cushioned wing-axles Further improves ride over a multitude of terrains.
Replaceable individual wheel spindles Spindles can be replaced when damaged without replacing entire axle assembly.
Wheel options
LP Performance hitch option
Bar-tite hitch option
62
RC(M)4715 & RCG(M)4715 Rotary Cutters 334-113M
Table of Contents
RC(M)4715 & RCG(M)4715 Models
Rotary Cutters
All Land Pride
voluntary testing procedures according to ISO 4254-13.
Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
Shows confidence in gearbox integrity.
Capable of handling heavy cutting applications.
Gearbox bottom seal protection for longer bearing life.
Sliding guard offers protection and easy access for improved efficiency of splitter
gearbox maintenance.
Driveline grease zerks are easier to access.
Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Allows for a tighter turning radius.
Park jack can be adjusted to be perpendicular to the ground.
Serves as support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Driveline is matched just right for tractor capacity. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Allows clean cutting of material.
Eliminates skipping during turns.
Provides the critical strength needed for consistent, top performance.
Standard thick stump jumper material keeps damage to a minimum.
Reduces accumulation of debris and is easier and faster to clean.
Makes center decks and wing decks stronger.
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Run two or four skid shoes in locations under the tongue pivots or out at the wing
hinges.
Reduces gouging the ground when turning.
LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.
cutter
Allows
to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
Larger diameter hinge rod provides greater strength in the hinge area.
Transport lock pins will hold wings in folded position in the event of hydraulic loss.
utter
C
pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Protects unit from bumps and ground shock.
Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can't go flat.
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar up to 12 degrees in both left and right directions.
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Benefits
have been designed and tested and meet rigorous
6/3/20
Advertisement
Table of Contents
