Table of Contents
Advertisement
Section 7: Features & Benefits
Section 7: Features & Benefits
Features
Surpassed rugged
industry standards
Factory assembled
7 Year gearbox warranty
Rugged heavy built gearboxes
Gearbox seal protection
2 3/8" Output gearbox shaft
2 Piece shield on wing gearbox
LED signal lights
LP Performance Hitch
Low hitch weight on tractor drawbar Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch
Adjustable park jack angle
Adjustable driveline hanger
Input driveline: Cat. 6 CV
Drivelines with slip-clutches:
Cat. 5 intermediate
Cat. 4 Wing
Grease zerks on end caps of
driveline cross journals
High Blade tip speed
6" Blade overlap
Good cutting capacity
12" Deck height
3/16" Round stump jumper
Smooth Top Design
Deck sheet tops are 100% welded
1/4" Sidewall thickness
Beveled skid shoe on wing
Hinged wing section
1" Solid hinge rods
Wing transport lock
Enclosed dual leveling rods
5-Bolt hubs on trailing arms
Drain holes in wheel rims
Spring-cushioned trailing arms
Replaceable wheel spindles
7/8" Leveling rods
Wheel options
LP Performance Hitch option
Bar-tite hitch option
Deck ring option
60
RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:
Table of Contents
RC4610 and RCM4610 Models
All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Capable of handling heavy cutting applications.
Gearbox bottom seal protection for longer bearing life.
Large output shaft handles shock loads better.
Driveline grease zerks are easier to access.
LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Reduces drawbar wear by keeping hitch level while going through ditches.
Allows for a tighter turning radius.
Park jack can be adjusted to be perpendicular to the ground.
Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Intermediate and wing driveline cross journals are easier to grease.
Allows clean cutting of material.
Eliminates skipping during turns.
Can cut brushy areas with saplings up to 3 1/2".
Handles heavy cutting, which reduces balling-up of cut material under the deck.
Standard thick stump jumper material keeps damage to a minimum.
Allows for easy cleaning of deck.
Makes center deck and wing deck stronger.
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Reduces gouging the ground when turning.
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Transport lock will hold the wing in the folded position in the event of hydraulic loss.
Cutter pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Allows water to drain from wheel(s) mounted on folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
Provides independent suspension, cushions loads on cutter and tractor drawbar.
Wheel spindles can be replaced when damaged without replacing entire axle assembly.
Large diameter leveling rods provide superior supporting strength over rough terrain.
Laminated tires: Eliminates flats.
Air filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can't go flat.
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Keeps blades from damaging the deck.
Benefits
1/14/19
Advertisement
Table of Contents
