Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/27/18...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Lower implement to the ground and Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only. Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
Page 7
Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery Land Pride recommends the use of a CAB or roll-over-protective- Never carry riders on tractor or structures (ROPS) and seat belt implement.
Spray soapy water on the surface where the label is to all damaged or missing labels. Order new labels from your be placed. nearest Land Pride dealer. To find your nearest dealer, Peel backing from label. Press firmly onto the surface. visit our dealer locator at www.landpride.com.
Page 9
Table of Contents Important Safety Information 27862 818-487C Danger Avoid Injury (Both Sides) 27863 27862 818-491C Warning Pinch/Shear (Both sides) 27863 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
Table of Contents Introduction Introduction Land Pride welcomes you to the growing family of new IMPORTANT: A special point of information related product owners. This 3-Way Rear Blade has been to the following topic. Land Pride’s intention is this designed with care and built by skilled workers using information must be read &...
4. Put tractor in park or set park brake, turn off engine, standard hook-up. A 3-Point Category II hitch is required and remove switch key to prevent unauthorized if hooking-up with Land Pride’s QH20 Quick Hitch. starting. 5. Relieve all hydraulic pressure to auxiliary hydraulic lines.
Page 12
15. Hairpin Cotter SHIPPING BLOCK (#20) 16. 1/4" Cotter pin DO NOT REMOVE UNTIL 17. Grader Blade AFTER ALL HYDRAULIC 18. 3/4" Cap Screw CYLINDERS HAVE BEEN 19. 3/4" Locknut INSTALLED. Blade Assembly Figure 1-1 RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
Page 13
(#4). Make sure cylinder ports are on top and cylinder base is mounted to lug (#1). 2. Secure clevis pins with cotter pins (#3). Bend one or more legs on the pins to keep them from falling out. 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
Page 14
3. Remove shipping port plugs from cylinder ports. 4. Screw adapter fittings (#6) to the two cylinder ports with O-rings facing the ports. Tighten fittings. RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
Page 15
(#2). 2. Secure clevis pins with cotter pins (#3). Bend one or more legs on the pins to keep them from falling out. 3. Remove shipping port plugs from cylinder ports. 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
If hooking-up with a Cat. III hitch, a 1.01" I.D. x 1 1/4" O.D. x 2.06" long bushing (supplied NOTE: Land Pride’s Quick Hitch can be attached to by customer) is also required. Bushing may be the tractor to provide quick and easy 3-point hook- purchased from Land Pride, Part No.
Refer to Figure 1-5: The customer must purchase and install two 1.141" ID x 1.4375" OD x 2 1/2" long busings (Land Pride Part No. 890-940C) on the lower hitch pins. The customer supplied center hitch pin must be moved to the lower hitch holes.
(#5). Secure hitch pin with hairpin cotter (#14). Store hose ends in storage slots. If hitched to a tractor, connect hoses to tractor’s hydraulic system. NOTE: The following Land Pride Components are required if Cat. II Quick Hitch is used: One Pin Part No. 805-219C Two Bushings Part No.
Page 19
2. Insert skid shoe (#3) in skid shoe mount (#2) and secure with hitch pin (#7) and hairpin cotter (#8). 3. Repeat steps 1 & 2 on the left side of the moldboard. 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
3. Rotate 3-Way Rear Blade clockwise 180 degrees. 4. Reconnect angle cylinder to turntable lug. IMPORTANT: Make sure angle cylinder is installed correctly before using the blade. If not, the blade and/or angle cylinder can be damaged. RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
The moldboard can fall from the its pivot mount or tilt mount if retaining hardware is loose or missing. 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
Make the following inspections after attaching the Rear vehicles may pass you safely. Blade to the tractor: • Slow down if traveling on a wet slick road. Inspect tractor safety equipment to make sure it is in good working condition. RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
The combined hitch frame. angles, pivot, and offset, should be between 45 and 60 If necessary, adjust length of upper center 3-Point link until the hitch pin can be removed from the hitch frame. 11/27/18 RBT6010 & RBT6012 Rear Blades 301-360M...
Page 24
Manual, completed the operations checklist, and waterways you will probably need to set a tilt angle on the properly attached your Land Pride Rear Blade to your blade to achieve the desired effect. If you are grading or tractor, you are now almost ready to begin work.
3. Repaint parts where paint is worn or scratched to torque. The moldboard can fall from the its pivot mount or prevent rust. Ask your dealer for Aerosol Land Pride tilt mount if retaining hardware is loose or missing. touch-up paint. Paint is also available in touch-up Always secure equipment with solid, non-concrete supports •...
Page 26
(Blade must be lifted off the ground for lubrication) Type of Lubrication: Multi-purpose Grease Quantity = Until grease emerges 27871 Hours Front Pivot Shaft Type of Lubrication: Multi-purpose Grease Quantity = Until grease emerges 27871 RBT6010 & RBT6012 Rear Blades 301-360M 11/27/18...
Can go from Cat. II to Cat. III 3-Point tractor. Enables a wider variety of tractors to be used. Quick hitch compatible Compatible with Land Pride QH20 Cat. II Quick hitch for easy attachment and removal. Increases productivity. Blade angles left and right...
Blade Does Not Penetrate Soil Ground is too hard. Loosen soil with a Land Pride Scarifier. Apply water to the surface or wait for a rain. Blade cutting edge is too dull. Replace blade to get a new cutting edge.
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.