Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 1/13/21...
Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture. detailed instructions. RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Replace parts on this implement correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this implement in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on the tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
Page 8
Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 1/13/21...
Spray soapy water on the surface where the label is to all damaged or missing labels. Order new labels from your be placed. nearest Land Pride dealer. To find your nearest dealer, Peel backing from label. Press firmly onto the surface. visit our dealer locator at www.landpride.com.
Page 11
2" x 9" Red Reflector (2 places on back side of moldboard) 35107 838-615C 2" x 9" Amber Reflector (RBT45108 Only: On front left side of moldboard) 35106 818-491C 35107 Warning Pinch/Shear 838-075C Caution Falling Moldboard 35107 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
Table of Contents Introduction Introduction Land Pride welcomes you to the growing family of new NOTE: A special point of information that the product owners. This Rear Blade has been designed with operator should be aware of before continuing. care and built by skilled workers using quality materials.
Weight & Horsepower A Selector Valve Kit may be purchased through your local Land Pride dealer if your tractor does not have the WARNING required number of duplex outlets. The selector valve To avoid serious injury or death: provides a way to operate 2 hydraulic cylinders through one duplex outlet at the tractor.
Page 14
Tighten hardware to secure main frame to blade pivot assembly. SHIPPING BLOCK DO NOT REMOVE UNTIL AFTER ALL HYDRAULIC CYLINDERS AND/OR RATCHET JACK AND MANUAL LINKS HAVE BEEN INSTALLED. 18767 Rear Blade Assembly Figure 1-1 RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
The customer must purchase and install two lugs.Keep for reuse. 1.141" ID x 1.4375" OD x 2 1/2" long busings (Land Pride 3. Slowly back tractor up to Rear Blade while using Part No. 890-940C) on the lower hitch pins. Also, the tractor’s 3-Point hydraulic control to align hitch holes...
Page 16
8. Route hoses through hose bracket located on the right side of the front hitch. Connect hoses to tractor's hydraulic system. 24993 Hydraulic Blade Offsetting Figure 1-3 24994 Hydraulic Blade Angling Figure 1-4 RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
Page 17
9. Remove shipping block at this time. SHIPPING BLOCK DO NOT REMOVE UNTIL AFTER ALL HYDRAULIC CYLINDERS, RATCHET JACKS AND/OR MANUAL LINKS HAVE BEEN INSTALLED. 24995 Hydraulic Blade Offsetting and Angling Figure 1-5 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
Page 18
24999 Blade Offset Blade Angling SHIPPING BLOCK DO NOT REMOVE UNTIL AFTER ALL HYDRAULIC CYLINDERS AND/OR Blade Tilting RATCHET JACK AND MANUAL LINKS HAVE BEEN INSTALLED. Manual Offset, Angling and Tilt Figure 2-1 RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
6. Route hoses through the hose brackets located on the top of the main frame and right side of the front hitch. Connect hoses to tractor's hydraulic system. Customer to supply Quick Disconnect Couplings. 24996 Hydraulically Controlled Gauge Wheel Figure 2-2 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
Page 21
(#9) with two 3/8"-16 x 3" GR5 hex head cap hydraulic couplings.) screws (#8), spring lock washers (#10), and hex nuts (#11). Tighten nuts to the correct torque. Customer to supply Quick Disconnect Couplings. 24998 Hydraulic Selector Valve Assembly Figure 2-4 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
3. First tighten hex nuts (#8) to the correct torque and then next nuts (#6) last. 4. Repeat steps 1 through 3 for the left-hand end plate. 12550 End Plate Assembly 25535 Figure 2-6 Skid Shoe Assembly Figure 2-5 RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
4. The blade may also be rotated 180 degrees. a. Disconnect rod end of angle cylinder from blade turntable lug. b. Rotate 3-Way Rear Blade clockwise 180 degrees. c. Reconnect angle cylinder to turntable lug. 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
2. If the gauge wheel cylinder is attached to the selector valve, make certain its lever is set to operate that cylinder. 3. Operate tractor control lever to change gauge wheel height up or down. RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
Extending implement into the Hazard” on page 3 Replace damaged and worn tractor tires can result in loss of control and damage to the hoses with genuine Land Pride parts. implement and/or tractor. Transport With Rear Blade •...
Angle the blade to move the dirt toward and into the ditch while traveling forward. Set blade depth as needed (see “Grading” instructions on this page when setting blade depth). 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
Page 28
RBT45 Series Rear Blades were designed and built by Be careful not to over-stress the rear blade while Land Pride for category lI and lII three-point hitch and backfilling as load forces on the blade and frame Quick Hitch attachment for 75 to 125 hp tractors increase while backing up.
3. Repaint parts where paint is worn or scratched to torque. The moldboard can fall from the its pivot mount or prevent rust. Ask your dealer for Aerosol Land Pride tilt mount if retaining hardware is loose or missing. touch-up paint. Paint is also available in touch-up •...
Page 30
Type of Lubrication: Multi-purpose Grease Quantity = Until grease emerges 18775 Seasonally Moldboard and Blade Grease moldboard and blade when storing for an extended period of time. Type of Lubrication: Multi-purpose Grease 18765 Quantity = Coat Generously RBT4596 & RBT45108 Rear Blades 301-205M 1/13/21...
Page 31
Quantity = Until grease emerges 18772 Hours Gauge Wheel Caster Tube Type of Lubrication: Multi-purpose Grease Quantity = Until grease emerges 18772 Hours Gauge Wheel Hub Type of Lubrication: Multi-purpose Grease Quantity = Until grease emerges 18772 1/13/21 RBT4596 & RBT45108 Rear Blades 301-205M...
(kW) 125 (93.2) Maximum G.V.W. (lbs) lbs (kg) 9500 (4309.1) Hitch type Cat. 2 & 3 (Fits Land Pride Quick Hitch) Blade angle, hydraulic operated Up to 45 clockwise and counterclockwise with blade facing forward or reversed Angle cylinder inch (cm) 4 X 16 (10.2 x 40.6)
Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to be used. Quick hitch compatible Compatible with Land Pride Quick hitch for easy attachment and removal. Increases productivity. Blade angles left and right...
Blade Does Not Penetrate Soil Ground is too hard. Loosen soil with a Land Pride Scarifier. Apply water to the surface or wait for a rain. Blade cutting edge is too dull. Replace blade to get a new cutting edge.
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.