Section 7: Features And Benefits - Land Pride RCR2596 Operator's Manual

Section 7: Features and Benefits

Section 7: Features and Benefits
Features
Surpassed rugged
industry standards
Tractor horsepower range
540 or 1000 rpm
Gearbox horsepower rating
5 Year gearbox warranty
3 Gearboxes
Splined rubber flex- couplers
between the center and
outboard gearboxes
Constant velocity u-Joint
option on RCR2510 &
RCRM2510 pull-type
Slip-clutch protection
on main driveline
3-Point or pull-type
High productive cutting width
Fully welded 10 gauge deck
3/16" Sidewall thickness
Obstacle free underside
Round back design
Dual leveling rods
on pull-type
Chain or rubber shield option
Full length skids with
replaceable shoes
Splined blade hub
3/16" Round stump jumper
1" x 4" Blade bar
1/2" x 4" Heat-treated blades
1 1/2" Dia. cutting capacity
High blade tip speed
Laminated tires
Airplane tires (Pull-type only)
Fits Land Pride Quick-Hitch
48
RCR2596, RCR2510, and RCRM2510 Rotary Cutters 312-753M
Table of Contents
RCR25 Series
All Land Pride cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
3-point (2596 Model = 50 - 110 hp) & (2510 Model = 60 - 110 hp)
Pull-type (2596 Model = 30 - 110 hp) & (2510 Model = 50 - 110 hp)
Fits wider variety of tractors. (RCR2596 is 540 rpm only)
120 Horsepower on splitter gearbox and 60 hp on outboard gearboxes.
Shows our confidence in the gearbox integrity.
Allows equal torque to be spread to left and right gearbox.
Protects the driveline and gearboxes from hard objects in the blade path.
Reduces chatter and extends life of U-joint during turns.
Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
Pull-type fits older tractors without a top link or smaller tractors without enough lift capacity.
(RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3)
RCR2596 cuts 8'-0" width.
RCR2510 & RCRM2510 cuts 9'-10" width.
Fully welded deck adds rigidity.
Protects sidewalls from thrown objects.
Underside of deck is free of reinforcement members which tend to allow material to lodge.
Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
Dual leveling rods eliminate deck twisting when going over uneven terrain.
Reduces flying debris.
Adds reinforcement to side panels. Replaceable shoes allows for change before wearing
through to weld-on piece.
Splined blade hub offers tight non-slipping attachment to output shaft.
Standard stump jumper aids in sliding over obstructions, which helps protect gearbox
output shaft.
Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
Heat-treated blades last longer than non-heat-treated blades.
Aids in cutting brush.
RCR2596 (540 rpm) = 14,792 FPM
RCR2510 (540 rpm) = 17,749 FPM
RCRM2510 (1000 rpm) = 18,035 FPM
Laminated tires can handle almost any condition.
Airplane tires offer smooth road-ability.
Allows for quick and easy one person hook-up.
Benefits
Means cleaner cutting of material.
7/29/20