Table of Contents
Advertisement
Section 10: Features & Benefits
Section 10: Features & Benefits
Features
Tractor hp Range
RCP(M)2760
RCP(M)3760
Gearbox hp Rating
3 Point Design
Cutter Deck Visibility
Factory Assembled
Grease Ports
10' Transport Width
Parallel Arm Design
Long Horizontal Reach
RCP(M)2760 = 15'-6" (4.72 m)
RCP(M)3760 = 18'-10" (5.74 m)
Above Grade Vertical Reach
RCP(M)2760 = 11'-5" (3.47 m)
RCP(M)3760 = 13'-5" (4.08 m)
Below Grade Reach
RCP(M)2760 = 9'-1" (2.76 m)
RCP(M)3760 = 11'-0" (3.35 m)
180 Degree Operating Tilt Arc
Cat. 2 & 3; 540 or 1000 rpm
40 Gallon Oil Reservoir
2" (5 cm) Cutting Capacity
High Blade Tip Speed
Two Parking Stands
In-line Filter
Shut-off Valve
Oil Pressure Gauge
Hydraulic Breakaway
Gauge Wheels Option
Independent Control Option
(Self-Contained Hydraulics)
Kubota 3-Point Stabilizer Kit
Slow Moving Vehicle Mounting
Socket (Standard)
Slow Moving Vehicle Sign
(Accessory)
70
RCP(M)2760 & RCP(M)3760 Parallel Arm Rotary Cutter 316-548M
Table of Contents
RCP(M)27 & RCP(M)37 Series (Parallel Arm)
Designed for 75 minimum hp tractor with minimum weight of 8,000 lbs. (3629 kg)
Designed for 95 minimum hp tractor with minimum weight of 12,000 lbs. (5443 kg)
150 hp
Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor.
cutter
Visibility of the
deck is captured from the operator's seat. Easy to see operation.
Operator does not have to look behind.
Arrives ready for the customer, saves time and money. (Excluding fluids).
All grease ports are easily accessible for servicing.
Folds up close to the tractor. No weight brackets or decks hanging away from the tractor.
Typically, not much wider than the tractor, which means safer transporting.
Three cylinders used in a parallel arm design allows any cylinder to be adjusted without
changing the position of the others. Means less positioning.
Good access for reaching vegetation far away from the tractor.
Better access for reaching vegetation far away from the tractor.
Good access for reaching up embankments and cutting low over hanging limbs.
Better access for reaching up embankments and cutting low over hanging limbs.
Good access for reaching down embankments.
Better access for reaching down embankments.
Cutter head can be positioned to reach different angles.
Fits a wide variety of tractors.
Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
Ideal for trimming brush.
15,000 fm (4,572 meters / minute) tip speed means cleaner cutting.
Easy and level storage, makes it easy for hooking to tractor.
Cleans hydraulic fluid before it re-enters the reservoir.
Permits maintenance with minimum oil loss.
Easily monitor oil pressure for optimum performance of unit.
Allows the parallel arms to pivot backwards to avoid obstacles and to protect
and parallel arms. Parallel arms are pivoted back to normal operating position with the
hydraulic breakaway cylinder.
Decks on gauge wheels eliminating frequent deck positioning and vigilant watch for
changes in ground contour under the tractor and deck.
Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. This
option uses the RCP hydraulic system to operate the cutter.
Makes the RCP2760 Parallel Arm Rotary Cutter a match fit for Kubota tractor model
M126GX, M135GX, M6-141, and M6-141.
numbers
Mounting socket receives most slow moving vehicle signs equipped with a mounting blade
for ease of attachment and removal when transporting on a truck or trailer.
Slow moving vehicle sign is offered as an accessory when the tractor's slow moving vehicle
sign and mounting blade does not fit the cutter's standard mounting socket.
Benefits
cutter
deck
3/12/21
Advertisement
Table of Contents
