Assa Abloy Securitron Shear Aligning Magnalock SAM Series Manual page 2

Rev. A.4, 12/01
This section explains technically the SAM's electrical characteristics as a load and is for
reference.
SECTION 3.2 STANDARD LOCK -------------------------------------------------------------Page 11
This section explains powering and switching the SAM's.
SECTION 3.3 AVOIDING POOR RELEASE CHARACTERISTICS ------------------Page 12
This section warns against wiring mistakes that can produce a delay on lock release.
SECTION 3.4 WIRE GAUGE SIZING---------------------------------------------------------Page 12
This reference section explains how to select wire size for applications where the lock is
distant from the power supply.
SECTION 3.5 "SC"SENSTAT OPTION------------------------------------------------------Page 13
Read this section if you have a Senstat unit (SAMSC).
SECTION 3.6 DOUBLE DOOR PROCEDURE FOR STATUS REPORTING ------Page 14
This section applies if you have Senstat locks on a double door and want them to report as
a single lock.
SECTION 3.7 EMERGENCY RELEASE -----------------------------------------------------Page 14
This section should be understood by all installers.
APPENDIX A TROUBLESHOOTING ---------------------------------------------------------Page i
Refer to this section before calling the factory on any operating problem.
APPENDIX B CALCULATING WIRE GAUGE SIZING-----------------------------------Page ii
This detailed reference section explains how to select wire gauge in complicated multi-lock
installations.