Roland VersaUV LEC-300 User Manual page 6

Setup of Media ( [MEDIA SETTING] menu )

Move the height-adjustment lever to adjust the head height.
When moving to the [High] direction, the buzzer sounds twice, and to the [Low] direction, the buzzer
sounds once.
LEC-300 / 300A
Height-adjustment lever
Move firmly, until it stops.
Normally set to [Low].

Close the front cover.
For the separate setting method and descriptions for this item, see here.
Height to Match Media Thickness"
To cancel the setting
Procedure

Press

QUIT SETTING?
[YES]
MENU
MEDIA SETTING
4
High
Low
However, when the media is over 0.5mm thick, set to [High].
during the setting.
Press
NO
Press
The screen returns to the screen shown at the left.
By selecting [NO], the screen returns to the screen dis-
played when you pressed
LEC-330
High
Low
Height-adjustment lever
Move firmly, until it stops.
User's Manual, "Adjusting Head

to select [YES].
.
.