Roland VersaUV LEC-300 User Manual page 15

9.
Saving the Setting as Preset

PRESET
[SAVE] NEXT

SAVE TO
NAME1

SET NAME
COMPLETED
For the separate setting method and descriptions for this item, see here.
Settings to Match the Media"
This completes the operation of the [MEDIA SETTING] menu.
Setup of Media ( [MEDIA SETTING] menu )
Press to select [SAVE].
Press to enable the setting.
If you select [NEXT], the performed settings are retained. However,
those settings are not saved as presets.
Use
to save.
You can select one of NAME1 to 8.
Press to enable the setting.
Use
Use to move the next character.
Select the following characters in the same way.
You can enter up to15 characters.
Press to enable the setting.
to select to select the destination
to select characters.
User's Manual, "Saving the Printer

13