Roland VersaUV LEC-300 User Manual page 18

When Performing Output Involving Pullback Movement (or When [TU2] Is Selected)
How to Output by Limiting Length (Roland VersaWorks)
This section describes "how to output by limiting the length" using Roland VersaWorks (hereinafter RVW). For
information on the detail usage of RVW, refer to the user's manual of RVW.
Procedure

Open "Que Properties" window (or "Job Setting" window)
Select the input folder to be used.

"Que Properties" window
(The setting item and the method in "Job Setting" window
are the same as this procedure.)
16
Click .
Select "CustomCUT" from [Size] under
"Media Settings."
Set "H."