Instructions for use KaVo polymerisation light Poly One
5 Operation
Note
The curing light Poly One shuts off automatically once the selected time is
elapsed.
▶ Press button briefly to set the curing time to 20 seconds.
Curing light is on for 20 seconds and then shuts off.
▶ Press button until you hear two acoustical signals to set the curing time to 40
seconds.
Curing light is on for 40 seconds and then shuts off.
▶ Press button until you hear three acoustical signals to set the curing time to 60
seconds.
Curing light is on for 60 seconds and then shuts off.
▶ Press the button to terminate the curing time.
The curing light shuts off.
▶ Hold the handpiece in an ergonomic hand position and place it on the respec‐
tive curing site.
16/22