Table of Contents
Advertisement
Instructions for use KaVo polymerisation light Poly One
2 Safety | 2.3 Safety instructions
2.3 Safety instructions
2.3.1 General information
DANGER
Explosion hazard.
Risk of fatal injury.
▶ Do not use KaVo product in areas subject an explosion hazard.
WARNING
Application of un-authorised accessories or un-authorised modifications of the
product.
Accessories that have not been approved and/or inadmissible modifications of
the product could lead to hazards and/or personal injury or material damage.
▶ Only use accessories that have been approved for the combination with the
product by the manufacturer or are equipped with standardised interfaces (e.
g. MULTIflex couplings, INTRAmatic).
▶ Do not make any modifications to the device unless these have been ap‐
proved by the manufacturer of the product.
CAUTION
Premature wear and malfunctions from improper servicing and care.
Reduced product life.
▶ Perform regular proper care and maintenance!
The following persons are authorised to repair and service the KaVo product:
▪ Technicians of KaVo branch offices after appropriate product training.
▪ Specifically KaVo-trained technicians of KaVo franchised dealers.
Decommissioning
WARNING
Disposal of the product in the appropriate manner.
Prior to disposal, the product must be appropriately prepared or sterilised if this
is necessary.
2.3.2 Product-specific
Warning
Danger from optical radiation.
Eyes can be blinded or damaged by LED of risk group 2 in accordance with IEC
62471 (blue light).
▶ Do not gaze directly into the light exit aperture of the fibre-optic cable or into
the lamp.
9/22
Advertisement
Table of Contents
