Table of Contents
Advertisement
Instructions for use KaVo polymerisation light Poly One
3 Description of the Product | 3.1 Technical Specifications
3.1 Technical Specifications
Light source
Sterilisable parts
Wavelength
Curing times
Minimal radiation power
Weight of handpiece and fibre-optic ca‐
ble
Operating temperature
Max. power of the LED
Max. current of the LED
Rated power of the LED
Rated current of the LED
Mode: intermittent operation
Operating time
Pause time
Dimensions
Length including fibre-optic cable
Diameter
Cross-section of the optically active
surface of the fibre-optic cable
Operating environment
WARNING
Inappropriate operating conditions.
Impairment of the electrical safety of the device.
▶ It is essential to comply with the operating conditions specified in the "Tech‐
nical Specifications" chapter and not to exceed those conditions.
Ambient temperature
Relative humidity
Air pressure
Max. elevation for operation
LED
Fibre-optic cable made of glass
450 - 460 nm
3 curing times: 20, 40 or 60 seconds
800 mW/cm
160 g
42 °C (at an ambient temperature of 20
°C)
5 W
700 mA
3.3 W
530 mA
1 minute
1 minute
200 mm
25 mm
38.5 mm
+10 to +40 °C
30 to 75%
700 to 1,060 hPa
up to 3000 m
12/22
2
2
Advertisement
Table of Contents
