Mounting The Suntouch Controller - Pentair SOLARTOUCH 521592 Installation And User Manual

14
Mounting the SunTouch
The SolarTouch Controller can be mounted on a flat vertical surface, such as a wall or
post.
Note: Select a convenient location to mount the SolarTouch controller and
be sure the location is greater than five (5) feet from the pool or spa and no
further than 15 feet from the pool/spa valve.
To mount the SolarTouch Controller Enclosure:
1. Position the enclosure against the vertical flat surface. If wall anchors
are being used, support the enclosure in position (horizontally level and
square) against the surface and mark the bracket hole pattern on the wall.
2. Secure the enclosure with three (3) screws in the mounting bracket holes.
If using wall anchors, use 3/16" drill and set the anchors and secure the
enclosure with screws.
SolarTouch Solar Control System Installation and User's Guide
®
Controller
®
RS485
1 A5 FUSE
GROUND
PUMP
NEUTRAL
AC1
FILTER/
HOT
BOOSTER
AC2
PUMP
AC3
CLEANER
INTERRUPT
AC4
Lower Mounting bracket
Top mounting bracket
BLK GRN YEL RED
POOL SOLAR
SENSORS