Mounting The Controller Into The Outlet Box - Pentair COLOR SYNC CONTROLLER Installation Manual

INSTALLING THE CONTROLLER INTO THE OUTLET BOX
wire nut
GREEN
WHITE
BLACK
12O VAC Wall Outlet

Mounting the Controller into the Outlet Box

The controller mounts into a standard outlet box (22.5 cubic inches minimum).
See page 9 for outlet box specifications. Note: After wiring to the controller is
complete, check all wiring connections before mounting the controller into the
outlet box.
To install the controller into the outlet box:
1. Neatly arrange the wires in the back of the outlet box.
2. Apply the provided grease to the screw threads (to avoid damaging
gasket).
3. Align the controller with the screw holes of the outlet box.
4. Secure the Controller to the outlet box with the two (2) front retaining
screws.
GREEN
WHITE
BLACK
HOLD RECALL
sAm
Blue Party
Green Romance
Carribbean
Magenta
White American
Sunset
Red
Royal
12 VAC
Color Sync Controller
Color Sync Controller Installation Guide
300 Watt Transformer
AC Power cord
120 VAC Input
300 W
12 VAC
Safety
Transformer
12 VAC Output
Color LED Lights
13