Using The Solartouch Controller Control Buttons; Solartouch Controller Main Status Screens - Pentair SOLARTOUCH 521592 Installation And User Manual

Using the SolarTouch
Main Menu
Target Temp 81F
Press
UP/DOWN
button
Using the Enter Button to Disable/Enable SolarTouch Controller
For service purposes, the SolarTouch Controller can disable Heating or Cooling. Press
and hold the Enter button for 3 secs. to disable the system. The display shows
"SolarTouch Disabled". Press and hold the Enter button for 3 secs. again to enable the
SolarTouch controller. In the event of a power outage, after power is restored to
the SolarTouch controller the previous user settings are restored. Non-volatile memory
stores all user system settings.

SolarTouch Controller Main Status Screens

In normal operating mode the main screen displays the current WATER temperature,
TARGET Temperature and if SOLAR HEAT, NOCTURNAL COOLING or FREEZE is ON
or OFF. Press the Enter button to view the current Water and Solar temperatures.
Example: The following screens show SolarTouch controller in normal operating mode. The
water temperature is 60° F (15.6° C), solar heating is on and the target temperature is
80° F (26.7° C) (see Heating Menu page 5).
Water 60F
Target Temp 80F
Example: The following screens show SolarTouch controller solar is off. The water
temperature is 80° F, solar heating is off and the target temperature is 80° F (see
Heating Menu
Water 80F
Target Temp 80F
Water 80F
Solar 90F
Water 60F
Press Menu button
Main Menu
Heating Menu
Main Menu
Cooling Menu
Water 60F
Solar Heat On
Water 80F
Solar Heat Off
Press the Enter button to view
current solar temperatures.
Controller Control Buttons
®
Water 60F
Solar 50F
Press
Enter
button
Enable/Disable
Enter
Target Temp
Enable/Disable
Enter
Target Temp
SolarTouch Solar Control System Installation and User's Guide
®
Enable
Enter
/ Disable
40F
Enter
to
104F
Enable
Enter
Enter
/ Disable
40F
to
Enter
104F
3
Enter
Enter
Enter