Solartouch Controller Control Panel - Pentair SOLARTOUCH 521592 Installation And User Manual

2
SolarTouch Controller Control Panel
®
Liquid Crystal Display (LCD): The system LCD displays backlighting for easy viewing
1
of the menu items and status messages. Each button press will light the display. When
an event message is displayed, the backlight will also be on.
System Status LED indicator: When indicator is green, the system is running
2
normally. If indicator is solid red or blinking red, an error occurred. See page 11 for
error conditions.
3
Menu Button: Access Main Menu, Advanced Menu and exit menus. Press and hold
this button for three (3) seconds to access the Advanced Menu. If no menu activity is
detected after two (2) minutes, the main screen is displayed.
4
Less/More Buttons: Lower or Raise target water temperature. Scroll through menu
options. Adjust menu settings. All menu settings are permanently saved and retained
even after the unit is power off.
Enter button: This button has the following functions:
5
•
During normal operation, when SolarTouch
Temp, Target Temp and Solar Heat ON/OFF setting. Press and release the
Enter button to view current Water and Solar Temperature.
•
While in Main Menu or Advanced Menu, press the Enter button to view
menu item settings and scroll through menus options.
•
Press this button to select a menu item.
•
Press this button to save a menu setting and return to the menu tree.
• Press and hold the Enter button for three (3) seconds to disable all
SolarTouch controller functions (disables Heating, Cooling and Freeze
Protect), "SolarTouch Disabled" is displayed. To re-enable the SolarTouch
controller press and hold the Enter button for three (3) seconds.
Note: The display will automatically revert back to the monitoring water and solar
temperatures after 30 seconds from the last selection.
SolarTouch Solar Control System Installation and User's Guide
®
1
2
Controller is displaying Water
®
3
4 5