About Udi-28; Care And Maintenance; Revert To Factory Setting - UTC UDI-28 User Manual

Care and maintenance

The UDI-28™ boat unit requires very little care or maintenance.
After every dive: wash the antenna and antenna cable. Wipe down the UDI-28™ boat unit and make
sure that the connectors are well covered (using caps) and are dry prior to connecting the UDI-28™ to
the charger or the PC.
Do not use a water jet or pressure from hose to clean the UDI-28™ boat unit, to prevent damage to the
UDI-28™ boat unit mechanism.
Periodically the UDI-28™ boat unit may need to be serviced at an authorized laboratory for calibration
and battery replacement (at least once a year ( . Consult the UDI-28™ webpage for information or your
dealer.

Revert to factory setting:

In case you would like to revert to the original UDI-28™ boat unit factory settings, turn on the UDI28
boat unit by pressing the Up, Down and Enter buttons simultaneously. the message "set default"
appears on the screen. All customizations and settings you have done will be erased, and UDI28 boat
unit will turn on with the original factory settings.
ABOUT UDI
19:36 25/03/2014
S/N: B28-111007
Version:
UDI28_BLowB_14
Tables Tag
1C56AF
41