Mask Homing; Care And Maintenance - UTC UDI-28 User Manual

Mask Homing

You can temporarily mask the navigation homing beacon to prevent your UDI-28™ from sounding a
homing alarm when a homing signal is transmitted. This allows you temporarily disregard the homing
signal until the time you need it to return to the boat unit.
NOTE: Masking the homing beacon
dive.
To mask a homing beacon:
1. From the Navigation menu,
select Mask Homing and
press Enter.
2. In the Mask Homing menu,
select Enable to mask the
beacon and press Enter.
3. When you enable Mask Homing,
a small M is shown in the lower right
corner of the display.

Care and maintenance

UDI-28™ requires very little care or maintenance.
After every dive: wash and wipe down the UDI-28™ and make sure that the contacts are dry prior to
connecting the UDI-28™ to the charger or the PC.
Do not use a water jet or pressure from hose to clean the UDI-28, to prevent damage to the UDI-28™
mechanism.
Periodically the UDI-28™ may need to be serviced at an authorized laboratory for calibration and
battery replacement (at least once a year). Consult the UDI-28™ webpage for information or with your
dealer.
does not
mask any SOS beacons that may be activated during a
NAVIGATION
1. SOS track
2. Homing track
3. Mask Homing
MASK HOMING
1. Enable
2. Disable
15.4
25
depth
32.0
dive time
max
UDI28
124
29
M