Table of Contents
Advertisement
4. In the Send To menu, choose
a user by scrolling with the
Up/Down buttons.
Click Enter.
5. In the Messages menu, Send
is selected.
6. Click Enter. The message is
sent. You are automatically
returned to the Main menu.
Viewing last message
1. In the Messages menu,
select Last Msg Rcv, Click
Enter. The last message
received is shown, and
identifies the sender and
network used.
2. Use the Up/Down
buttons to scroll the last
five messages received.
Receiving a message
When you receive a text message from another UDI-28™ user, your UDI-28™ unit sounds an audible
signal, and the message is automatically displayed.
The received message identifies
the message sender and the
receiving time.
Click Enter to turn off the audible signal and return to the main display.
Receiving SOS Signals
Unlike other UDI-28™ signals, SOS signals are activated across all network channels, and have a longer
range than ordinary communications signals.
SEND TO
2. Bob
MESSAGES
1. New Message
2. User to Send
3. Send
MESSAGES
3. Send
4. Last Msg Rcv
5. Main
MSG FROM
Brad
15:21
Are you OK?
35
Advertisement
Table of Contents
