Transmit Homing; Setting Up The Udi-28 Boat Unit; Buddy Select - UTC UDI-28 User Manual

Transmit homing

The boat unit has the ability to transmit homing signal to a UDI-28™ user. By selecting this option, the
UDI-14™ wrist unit user receives a homing signal that allows the user to track and locate the UDI boat
unit.
The UDI-14™ wrist unit user can also use mask homing option (see page 36).
MAIN
2.Compass
3.Trans. homing
4.Setup

Setting up the UDI-28 Boat Unit

Use the Setup menu to set up the UDI-28 Boat Unit for the following features:


Buddy Select

 Trans. Power – select between 3 power levels
 UDI-28™ Setup - Set parameters – clock, audio, led.
The Setup menu flowchart is shown below.
To enter the Setup menu:
1. From the Main menu, use the Up/Down buttons to scroll to Setup.
2. Press Enter.
To exit the Setup menu and return to the Main menu, select Main, and press Enter.
Buddy Select
Select a User (named or
numbered) from the 28 individual
users or all users and press Enter.
This will be the user to whom you
send a message by default.
Setup
BUDDY SELECT
3 . Jen
4 . Bob
5 . Ar min
38
1. Buddy
Select
2. Trans.
power
3. UDI Setup
4. Main