Setting Up The Udi-28 - UTC UDI-28 User Manual

Setting up the UDI-28™

Use the Setup menu to set up the UDI-28™ for the following features:
 PC Connection – Connect to a PC for use with the UDI28-MANAGER software.
 Network Setup – Set network for communication with buddy.
 Trans. Power – Set the transmission power of the UDI-28™ units.
 UDI-28™ Setup – Set UDI-28™ parameters – clock, audio, led, units, etc.
 Main – Back to the Main menu.
The Setup menu flowchart is shown below.
1. From the Dive Info display, double-click of the Enter button will open the Main menu.
2. Use the Up/Down buttons to scroll to Setup.
3. Press Enter to choose the selection.
To exit the Setup menu and return to the Main menu, select Main, and press Enter.
Setup
15
1. PC
Connection
2. Network
Setup
3. Trans.
power
4. UDI Setup
5. Main