Sending A Message - UTC UDI-28 User Manual

NOTE: The Boat unit sends and receives messages to/from the active network only.
When the Boat unit is configured to "NET1" it does not send and receive messages from
"NET2" and vice versa
In the case that two groups of divers are located in the same area and they share one Boat
unit, then we advise that the Boat unit user will change NETS button from time to time to
control both NTES. (for example send message "are you OK?" and receive "OK" from each diver
in NET1 and NET2,.
When SOS signal is transmitted, the signal will be received by any device that
belongs to any SYSTEM in the operation range. Only devices that contain same table
tag as the SOS sender, will be able to receive full information, i.e, NET and name of
user.
To enter the Message menu:
 From the Main menu, select Messages and press Enter.
To exit the Messages menu and return to the Main menu, select Main, and press Enter.

Sending a message

The UDI-28™ unit can send any message from the preset text messages to other UDI-28™ users.
To send a text message:
1. In the Messages menu, select
New Message, and then click
Enter.
2. In the Message list, choose a
message by scrolling with the
Up/Down buttons.
Click Enter.
3. In the Messages menu, User
to Send is selected.
Click Enter
MESSAGES
5. Main
1. New Message
2. User to Send
MESSAGES
3.Are you OK?
MESSAGES
5. Main
1. New Message
2. User to Send
34