Bottom Timer; Pc Connection - UTC UDI-28 User Manual

Bottom timer

WARNING: the UDI-28™ works as bottom timer; it only measures the time and depth and doesn't
function as a diving computer that calculates any Nitrogen levels. User must be aware that in
this mode of operation, there are no alerts that are related to the diving.

PC Connection

Use the PC Connection option to connect UDI-28™ to your PC and use it with the UDI28-MANAGER
application. For information see the UDI28-MANAGER Software user manual.
WARNING: Do not enter the water with the UDI-28™ when the "PC connection" is active. This will
damage your UDI-28.
NOTE: When the PC connection has not been used for 2 minutes, it becomes disabled to prevent any
damage to the UDI-28™.
To use PC Connection:
1. Connect the quick connector to the UDI-28
2. Connect the USB cable to the quick connector.
3. Connect the USB cable to the PC computer.
4. On the UDI-28™ Setup menu, select PC Connection.
5. Select Enable press
Enter to enable the
PC Connection. A PC
indication appears at
the bottom right
corner of the display
while the UDI-28™ is
connected to the PC.
NOTE: Communication with the UDI-28™ is done using the UDI28-MANAGER software provided with
your system. For information see the UDI28-MANAGER Software user manual.
PC Connection
1. Enable
2. Disable
16