Installation - Njoy Shed 625 Instruction Manual

3

Installation

The UPS can protect your equipment from all
power problems such as surge, spikes, blackouts,
brownouts and line noise. When AC power is
present and the ON/OFF switch is turned ON, the
UPS is always charging the battery and provides
power to the equipment from AC line directly. A
reliable built-in battery can provide stable power
in order for you to complete your work, save your
data and safely shut down your system when
there is a utility power blackout.
The UPS is simple to operate and install. Please
read the following steps before connecting any
equipments to this UPS:
04
3.1 Connecting your equipment and fi rst usage
Step 1. Connect the UPS to a grounded AC power
outlets.
Step 2. Please turn ON the ON/OFF switch and
charge the battery at least 8 hours for a full
load before you start to use the UPS.
Step 3. Plug your PC or peripheral equipment
(printer, tv, scanner, fax, speakers etc.) into
the power outlets of the UPS
provide emergency battery backup power during
mains blackouts as well as surge protection
from surges and spikes).
CAUTION
Do NOT plug
LASER PRINTERS
into any of the
outlets.
Step 4. Connect the USB cable to your computer.
Step 5. Connect the network / internet cables to the
RJ45 outlet.
(these will
Do NOT plug any
SURGE STRIPS
into any of the
outlets.
05