List Of Main Alarms; Troubleshooting - GIRBAU ED260 Operation And Maintenance Instruction Manual

10.2.1. List of main alarms

CODE
2 Assembly error
3 Inverter communication fault
4 Inverter overcurrent
5 Motor overheating
6 General inverter fault
7 Inverter configuration fault
8 Lint door open
9 Overtemperature
10 Heating fault
11 Input temperature probe

10.2.2. Troubleshooting

2 ASSEMBLY ERROR
Incorrect microprocessor board connections.
Probable cause:
Incorrect connections or manipulation of the microprocessor board.
Procedure:
Disconnect the power supply and contact Authorised Technical Services.
3 INVERTER COMMUNICATION FAULT
Communication fault between the dryer control microprocessor and the drum motor inverter.
Probable cause:
Fault in the electrical supply from the inverter.
Fault in the communication wiring.
Fault in the inverter's communication circuits or the microprocessor.
Procedure:
Disconnect the machine from the power supply and reconnect it.
If fault persists, disconnect the power supply and contact Authorised Technical Services.
ALARMS
Alarms
CODE
12 Output temperature probe
13 Input thermostat alarm
14 Output thermostat alarm
15 Rotation fault
16 Gas ignition fault
17 Electric heating fault
18 Heating fault
19 Vaccuum fault
20 Fan fault
21 Model error
ALARMS
Code no. 576017
Rev. nº 02/0415
38