GIRBAU ED260 Operation And Maintenance Instruction Manual page 23

Programming the cooling-down time
Cooling time
Very important!
The cooling stage is intended to reduce the temperature inside the drum, thereby preventing creases in
the fabrics and reducing the risk of spontaneous combustion from static electricity.
As a security measure it is highly advisable to program enough time to allow the fabrics to cool.
Edit mode
Example: a cooling-down time of 2 minutes.
Increasing the length of the cooling time.
Maximum programmable time: 10 min.
Decreasing the length of the cooling time.
Minimum programmable time: 0 min.
Confirming the cooling time.
Accessing the following screen.
Back to the previous menu.
23
Code no. 576017
Rev. nº 02/0415