Pre-Set Programs; Initial Content Of The Programs; Explaining The Program Functions - GIRBAU ED260 Operation And Maintenance Instruction Manual

4.7. Pre-set programs

The dryer allows three drying
programs to be selected:

4.7.1. Initial content of the programs

The factory-set content of the three drying programs is the following:
PROG. DRYING TIME
28'
28'
28'

4.7.2. Explaining the program functions

DRYING TIME
Duration of the drying phase.
The drying time countdown starts the moment the program starts.
HEATING
Option for activating the dryer's heating system or not.
DRYING TEMPERATURE
Maximum temperature of the drying phase. When the temperature sensor detects a value equal to or greater
than the set temperature, the heating system is switched off.
INPUT TEMPERATURE
Maximum temperature of the air entering the machine. When the input temperature sensor detects a value
equal to or greater than the set temperature, the heating system is switched off.
ROTATION SPEED
Drum rotation speed (the rotation speed defined in the TABLES menu. Section 7.1.4).
ROTATION
The drum's start, stop and reverse rotation intervals. (The rotation reversal intervals defined in the TABLES
menu. Section 7.1.4).
COOLING-DOWN TIME
Stage following the drying phase during which the dryer operates with the heating system off.
This stage is very important to lower the temperature of the linen, prevent creases in the fabric and reduce
the risk of fire due to combustion spontaneous.
Program execution mode
DRYING
HEATING
TEMPERATURE
80ºC
176ºF
65ºC
149ºF
50ºC
122ºF
Very hot program
Hot program
Warm program
INPUT ROTATION
TEMPERATURE SPEED
200ºC
392ºF
200ºC
392ºF
200ºC
392ºF
19
COOLING-DOWN
ROTATION
TIME
2'
2'
2'
Code no. 576017
Rev. nº 02/0415